Basic Info.
Working Pressure
Low Pressure Pump
Influent Type of Impeller
Single Suction Pump
Pump Casing Combined
Verticaljoint Surface Pump
Usage
Pump, Slurry Pump, Mining
Transport Package
Wooden Case
Product Description
Pump Introduction
WA series are cantilevered, horizontal, natural rubber or hard metal lined centrifugal slurry pumps.
They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industry department.
Typical Applications
SAG mill discharge, ball mill discharge, Rod mil discharge, Ni acid slurry, coarse sand, coarse tailings, phosphate matrix, minerals concentrate, heavy media, sugar beet, dredging, bottom/fly ash, lime grinding, oil sands, mineral sands, fine tailings, slag granulation, phosphoric acid, coal, flotation, process chemical, pulp and paper, FGD, cyclone feed, etc.
Features
The frame plate for WA series pumps has interchangeable hard metal or pressure moulded elastomer liners. The impellers are made of hard metal or pressure moulded elastomer liners.
The shaft seals for WA series can be packing seal, centrifugal seal or mechanical seal.
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. There are many drive modes for option, such as V-belt, flexible coupling, gearbox, hydraulic coupler variable frequency, silicon controlled speed, etc. Among them, the flexible shaft coupling drive and V-belt feature of low cost and easy installation.
Pump Notation
200WA-ST: 100WAJ-D:
200: Outlet diameter: mm 100: Outlet diameter: mm
WA: Pump type: chrome alloy lined WAJ: Pump type: rubber lined
ST: Frame plate type D: Frame plate type
Construction Design
Pump Part Material
Part Name | Material | Specification | HRC | Application | OEM Code |
Liners & Impeller | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
AB15: 14%-18% chrome white iron | ≥59 | Used for higher wear condition | A07 |
AB29: 27%-29% chrome white iron | 43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 |
AB33: 33%-37% chrome white iron | | It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. | A33 |
Rubber | | | | R08 |
| | | R26 |
| | | R33 |
| | | R55 |
Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | | | G01 |
Stuffing Box | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | | | G01 |
Frame/Cover plate, bearing house & base | Metal | Grey iron | | | G01 |
Ductile iron | | | D21 |
Shaft | Metal | Carbon steel | | | E05 |
Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt | Stainless steel | 4Cr13 | | | C21 |
304 SS | | | C22 |
316 SS | | | C23 |
Joint rings & seals | Rubber | Butyl | | | S21 |
EPDM rubber | | | S01 |
Nitrile | | | S10 |
Hypalon | | | S31 |
Neoprene | | | S44/S42 |
Viton | | | S50 |
drive type
Address:
North Side of The Middle of Lincheng Road, Lincheng Country, Xingtai, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001, ISO 14000
Company Introduction:
We are professional pump manufacture. We supply submersible pumps, motors, impellors, pump case and so on. We have the ability to cast, machinery and assembling of pump parts.